{"product_id":"tbdca1-dc-coupled-power-amplifier","title":"TBDCA1 DC coupled power amplifier","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe TBDCA1 is a DC-coupled power amplifier with low output impedance. It delivers up to 150WRMS , has a 3dB bandwidth from DC to 3 MHz, an output voltage range of up to 55 Vpp , a maximum continuous output current of 10 A RMS and a usable frequency range from DC to 10 MHz.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eGeneral specification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 dB bandwidth: DC – 3 MHz, useable up to 10 MHz\u003c\/li\u003e\n\u003cli\u003eOutput power: 150 W, depending on load impedance\u003c\/li\u003e\n\u003cli\u003eVoltage gain: switchable; 0 dB, 10 dB, 20 dB, 30 dB, 40 dB\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: -20°C to +40°C\u003c\/li\u003e\n\u003cli\u003eDimensions: W 300 mm x H 150 mm x L 420 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 10 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOutput specification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNominal output power:\n\u003cul\u003e\n\u003cli\u003e150 W @ RLOAD ≤ 2 Ω\u003c\/li\u003e\n\u003cli\u003e80 W @ RLOAD = 4 Ω\u003c\/li\u003e\n\u003cli\u003e30 W @ RLOAD = 12 Ω\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eMax. output voltage: 56 VPP\u003c\/li\u003e\n\u003cli\u003eMax. continuous output current: 10 ARMS\u003c\/li\u003e\n\u003cli\u003eMax. output current: 20 ARMS for 30 seconds\u003c\/li\u003e\n\u003cli\u003eMin. output impedance: 0.5 Ω\u003c\/li\u003e\n\u003cli\u003eOutput offset voltage: adjustable; ± 25 V\u003c\/li\u003e\n\u003cli\u003eOutput connector: 4 mm posts\u003c\/li\u003e\n\u003cli\u003eVoltage monitor output: voltage division ratio: 1:20 @ 50 Ω; 1:10 @ High Z; BNC-female\u003c\/li\u003e\n\u003cli\u003eCurrent monitor output: trans-impedance: 0.1 V\/A @ 50 Ω; 0.2 V\/A @ High Z; BNC-female\u003c\/li\u003e\n\u003cli\u003eCurrent Limit: adjustable, 0 … ±12 A\u003c\/li\u003e\n\u003cli\u003eRise time: typ. ≥ 20 ns; ringing depending on load inductance and cable length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n\u003cstrong\u003e\u003c\/strong\u003eInput specification\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInput coupling: AC \/ DC; switchable\u003c\/li\u003e\n\u003cli\u003eInput impedance: 50 Ω \/ High Z; switchable\u003c\/li\u003e\n\u003cli\u003eInput voltage range: ± 3V (6Vpp ) for maximum output power at 0 dB gain\u003c\/li\u003e\n\u003cli\u003eMax. input voltage rating: ± 5V @ 50 Ohm input impedance; ± 30V @ High Z\u003c\/li\u003e\n\u003cli\u003eInput connector: BNC – female\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupply specification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 90 V – 260 V; 50 Hz \/ 60 Hz\u003c\/li\u003e\n\u003cli\u003eMax. current consumption: 9 A @ 115 VAC; 4.5 A @ 230 VAC\u003c\/li\u003e\n\u003cli\u003eConnector: EN 60320, C14\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGeneral purpose output amplifier for arbitrary waveform generators\u003c\/li\u003e\n\u003cli\u003eStress testing according to ISO 16750-2 and ISO 7637-2\u003c\/li\u003e\n\u003cli\u003ePower supply input impedance measurement\u003c\/li\u003e\n\u003cli\u003eStructure current injection for MIL-STD-461H, CS109\u003c\/li\u003e\n\u003cli\u003eVoltage ripple injection for MIL-STD-461H, CS101 or RTCA\/DO-160 Section 18\u003c\/li\u003e\n\u003cli\u003eImmunity testing according to ISO 11452-10, SAE J1113-2 and various automotive manufacturer specific standards\u003c\/li\u003e\n\u003cli\u003eRF power amplifier to drive Helmholtz coils or loop antennas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eDocumentation:\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.tekbox.com\/product\/TBDCA1_Manual.pdf\" title=\"Tekbox TBDCA1 Manual\"\u003e\u003cstrong\u003e\u003cspan\u003eTBMDA-CDN25 manual\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"TekBox","offers":[{"title":"Default Title","offer_id":54110000283832,"sku":"TBDCA1","price":5200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2177\/6499\/files\/TBDCA1_side.jpg?v=1789542754","url":"https:\/\/emcsupplies.com\/products\/tbdca1-dc-coupled-power-amplifier","provider":"emcsupplies.com","version":"1.0","type":"link"}