{"product_id":"tbl05100-1-c-5uh-100a-line-impedance-stabilisation-network-lisn","title":"TBL05100-1-C 5uH 100A Line Impedance Stabilisation Network LISN","description":"\u003cp\u003eThe TBL05100-1C is a universal 5µH LISN that meets the requirements of several standards. The TBL05100-1C is factory jumpered to 50Ω \/\/ 5µH + 1Ω, fulfilling the CISPR 16-1-2 and CISPR 25 impedance, phase an isolation specification. By setting internal jumper, it can be converted into 50Ω \/\/ 5µH variants that support standards such as CISPR 25, MIL-STD-461G, ISO11452-4 and ISO 7637-2. By adding an external 10uF capacitor, the impedance will fulfil DO-160 specifications.\u003c\/p\u003e\n\u003cp\u003eThe LISN is inserted into the EUT's (Equipment Under Test) supply line. Conducted noise at the EUT's supply terminals can be monitored at the BNC connector with a spectrum analyzer or a measurement receiver. A 5µH inductor decouples the source (supply) terminal from the EUT terminal.\u003c\/p\u003e\n\u003cp\u003eThe use of two TBL05100-1C in conjunction with the Tekbox LISN Mate allows for the measurement of common mode and differential mode noise separately. The unit comes equipped with a N-male to N-male RG232 cable, mating connectors and ground brackets to attach it to a ground plane.\u003c\/p\u003e\n\u003cp\u003eTopology: single path, configurable, 50Ω \/\/ 5µH + 1Ω, 50Ω \/\/ 5µH; the internal capacitor can be disconnected for ISO 7637-2 and DO-160 set ups; an external 10µF capacitor is required for DO-160; the LISN is factory setup to 50Ω \/\/ 5µH + 1Ω, other configurations require setting of an internal high current jumper.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe calibration kit can be found here: \u003ca href=\"https:\/\/emcsupplies.com\/products\/tbl0550-1c-cal-calibration-kit\" title=\"TBL0550-1C-CAL\"\u003eTBL0550-1C-CAL\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSupported standards: CISPR 16-1-2, CISPR 25, MIL-STD-461G, DO-160, ISO11452-4 and ISO 7637-2 \u003c\/li\u003e\n\u003cli\u003eCharacterized frequency range: 10 kHz – 400 MHz\u003c\/li\u003e\n\u003cli\u003eDC Resistance: \u0026lt; 5 mΩ Source+ to EUT+; \u0026lt; 5 mΩ Source- to EUT\u003c\/li\u003e\n\u003cli\u003eMaximum current: 100A; see plot with heat up characteristics, chapter 8\u003c\/li\u003e\n\u003cli\u003eMaximum operating voltage range: 0 – 500V AC @50\/60 Hz, 250V AC @ 400Hz, 1000V DC \u003c\/li\u003e\n\u003cli\u003eAbsolute maximum rating of internal components: 1500V DC\u003c\/li\u003e\n\u003cli\u003eRF connector: N-Female \u003c\/li\u003e\n\u003cli\u003eEUT connector: binding post M8, 4mm center hole, 100A, 1kV, Schützinger POL 102 L \/ RT\u003c\/li\u003e\n\u003cli\u003eSOURCE connector: binding post M8, 4mm center hole, 100A, 1kV, Schützinger POL 102 L \/ RT EARTH: 8 mm \u003c\/li\u003e\n\u003cli\u003eEarth stud with wing-nut, exposed stainless steel bottom panel with mounting slots and countersunk hole for 4mm screw\u003c\/li\u003e\n\u003cli\u003eJumper: Harwin D3087-98 \u003c\/li\u003e\n\u003cli\u003eDimensions: 300 mm x 150 mm x 150 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 2.7 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAccessories\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003ca title=\"TBLXXXX Accessories\" href=\"https:\/\/emcsupplies.com\/collections\/lisn\/products\/tblxxxx-accessories\"\u003e\u003cb\u003eCapacitor Modules\u003c\/b\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDocumentation\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.tekbox.com\/product\/TBL05100_1C_Manual.pdf\" title=\"Tekbox TBL05100-1-C Manual\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e5µH 100 A LISN User Manual\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003cdiv id=\"gtx-trans\" style=\"position: absolute; left: 0px; top: 788.008px;\"\u003e\n\u003cdiv class=\"gtx-trans-icon\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"TekBox","offers":[{"title":"Default Title","offer_id":53607161331896,"sku":"TBL05100-1-C","price":1540.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2177\/6499\/files\/TBL05100-1C_side.jpg?v=1781878289","url":"https:\/\/emcsupplies.com\/products\/tbl05100-1-c-5uh-100a-line-impedance-stabilisation-network-lisn","provider":"emcsupplies.com","version":"1.0","type":"link"}